Instruction

Home
Up

20 December, 2005 05:03 PM +0800

Interesting Links

Father's Love

 

 

 

 

WINDMILL

 

Aerosol Spray Paint

 

Surface to be sprayed must be clean and free of dirt, grease, wax, rust etc before application.

 

Shake Can vigorously for at least 30 seconds until metal agitator in the can rattles.

 

Hold can approximately 30cm from object.

 

To Spray paint evenly, keep the can in motion from side to side.  Do not allow paint to build up.

 

Spray one coat at a time.  Allow at least 10 minutes in between coats.

 

For best results, stored at room temperature with can facing down.

IMPORTANT:

To avoid clogs, turn can upside down and spray a short jet of clear gas for 3 seconds to clear paint in valve after completing each job.

 

FLAMMABLE

KEEP AWAY FROM SOURCES

OF IGNITION – NO SMOKING

 

Distributor & Agent for : "Siroflex" & "Windmill" Sealants, "Aremsa" Rackings, "Golden Pagoda" Welding Electrodes, "Vflex" & "White Dove" Abrasives, "Win" & "Double Dove" Steel Slotted Angles, "Chairo", "Tricircle" & "Corbin" Padlocks & "Windmill" Aerosol Spray.